The Saudi Dental Journal
Volume 22, Issue 3 , Pages 107-112 , July 2010

Bi-axial flexural strength of dual-polymerizing agents cemented to human dentin after photo-activation with different light-curing systems

Received 4 March 2009 ,Revised 18 October 2009 ,Accepted 9 December 2009.

References 

  1. Andrzejewska E. Photopolymerization kinetics of multifunctional monomers. Prog. Polym. Sci. 2001;26:605–665
  2. Arrais CA, Giannini M, Rueggeberg FA, Pashley DH. Effect of curing mode on microtensile bond strength to dentin of two dual-cured adhesive systems in combination with resin luting cements for indirect restorations. Oper. Dent. 2007;32(1):37–44
  3. Arrais CA, Giannin M, Rueggeberg FA, Pashley DH. Microtensile bond strength of dual – polymerizing cementing systems to dentin using different polymerizing modes. J. Prosthet. Dent. 2007;97:99–106
  4. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle materials. J. Dent. Res. 1990;12:179–1799
  5. Deepa CS, Krishnan VK. Effect of resin matrix ratio, storage medium, and time upon the physical properties of a radiopaque dental composite. J. Biomater. Appl. 2000;14(3):296–315
  6. De Menezes M, Arrais C, Giannini M. Influence of light-activated and auto- and dual-polymerizing adhesive systems on bond strength of indirect composite resin to dentin. J. Prosthet. Dent. 2006;96:115–121
  7. de With G, Wagemens HHM. Ball-on-ring test revisited. J. Am. Ceram. Soc. 1989;72:1538–1541
  8. Dietchi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent. Mater. 1994;10(6):353–362
  9. Duke ES. Resin-based luting cements. Comp. 2000;21(9):740–743
  10. Ferracane JL, Berge HY, Condon JR. In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler/matrix coupling. J. Biomed. Mater. Res. 1998;42:465–472
  11. Hooshmand T, Parvizi S, Keshvad A. Effect of surface acid etching on the biaxial flexural strength of two hot pressed glass ceramics. J. Prosthodont. 2008;17:415–419
  12. Inokoshi S, Willems G, Van Meerbeek B, Lambrechts P, Braem M, Vanherle G. Dual-cure luting composites: part I: filler particle distribution. J. Oral Rehabil. 1993;20(2):133–146
  13. Karmer Lohbaueru N, Fraukenbenberger R. Adhesive luting of indirect restorations. Am. J. Dent. 2000;13:60D–76D
  14. La Torre G, Marigo L, Pascarella GA, Rumi G. Light-emitting diodes (LED) technology applied to the photopolymerization of resin composites. Minerva Stomatol. 2003;52:193–200
  15. Love RM, Purton DG. Retention of posts with resin, glass ionomer and hybrid cements. J. Dent. 1998;26(7):599–602
  16. Mark YF, Lai SC, Cheung CS, Chan AW, Tay FR, Pashley DH. Microtensile bond testing of resin cements to dentin and an indirect resin composite. Dent. Mater. 2002;18:609–621
  17. Mills RW, Uhl A, Jandt KD. Optical power outputs, spectra and dental composite depth of cure, obtained with blue light-emitting diode (LED) and halogen light curing units (LCUs). Br. Dent. J. 2002;193:459–463
  18. Miyazaki M, Oshida Y, Moore BK, Onose H. Effect of light exposure on fracture toughness and flexural strength of light-cured composites. Dent. Mater. 1996;12:328–332
  19. Morrel R, McCormick NJ, Bevan J, Lodeiro M, Margetson J. Biaxial disc flexural-modulus and strength testing. Br. Ceram. Trans. 1999;98:234–240
  20. Nomoto R, Uchida K, Moriyama K, Hirasaw T. Changes in light intensity with time on light curing units. J. Jpn. Soc. Dent. Mater. Dev. 1998;17(1):62–66
  21. Nomoto R, McCabe JF, Hirano S. Comparison of halogen, plasma and LED curing units. Oper. Dent. 2004;29(3):287–294
  22. Pace LL, Hummel S, Marker V, Bolouri A. Comparison of the flexural strength of five adhesive resin cements. J. Prosthet. 2007;16(1):18–24
  23. Pettemerides AP, Ireland AJ, Sherriff M. An ex vivo investigation into the use of a plasma arc lamp when using a visible light cured composite and a resin-modified glass poly (alkenoate) cements in orthodontic bonding. J. Orthod. 2001;28:237–244
  24. Plain WM, Fleming GJP, Trevor Burke FJ, Marquis PM, Randall RC. The reliability in flexural strength testing of a novel dental composite. J. Dent. 2003;31:549–557
  25. Rueggeberg FA. Contemporary issues in photo curing. Compend. Contin. Educ. Dent. 1999;25(Suppl.):55–59
  26. Rueggeberg FA, Jordan DM. Effect of light-tip distance on polymerization of resin composite. Int. J. Prosthodont. 1993;6:364–370
  27. Taher N, Al-Khairallah Y, Al-Aujan S, AD’DAhash M. The effect of different light curing methods on temperature changes of dual polymerizing agents cemented to human dentin. J. Contemp. Dent. Pract. 2008;9(1):1–8
  28. Timoshenkos , Woinowsky-Krieger S. Symmetrical Bending of Circular Plates. Theory of Plates and Shells. second ed.. New York: McGraw-Hill; 1959;pp. 87–121 (chapter 3)
  29. Uno S, Asmussen E. Marginal adaptation of a restorative resin polymerized at reduced rate. Scand. J. Dent. Res. 1991;99:440–444
  30. Unterbrink Gl, Muessner R. Influence of light intensity on two restorative systems. J. Dent. 1995;23:183–189
  31. Vandewalle KS, Roberts HW, Tiba A, Chariton DG. Thermal emission and curing efficiency of LED and halogen curing lights. Oper. Dent. 2005;30:259–266
  32. White SN, Sorensen JA, Kang SK, et al. Microleakage of new crown and fixed partial denture luting agents. J. Prosthet. Dent. 1992;67:156–161

PII: S1013-9052(10)00040-4

doi: 10.1016/j.sdentj.2010.04.002

The Saudi Dental Journal
Volume 22, Issue 3 , Pages 107-112 , July 2010

Article Tools

* Image Usage & Resolution